Submersible Pumps (TF-SP). Proposed catalog envelope: 10–2,500 m³/h (44–11,000 gpm); 5–120 m. Final selection is project-specific.
| Model | TF-SP |
|---|---|
| Pump Type | Submersible centrifugal pump, wet- or dry-installed depending model |
| Nominal Size Range | 2 in to 16 in discharge |
| Flow Range | 10–2,500 m³/h (44–11,000 gpm) |
| Head | 5–120 m |
| Pressure Rating | Duty-based casing pressure |
| Temperature | 0 to 40 °C standard |
| Connection | Flanged / auto-coupling / hose |
Casing: Cast iron / ductile iron / stainless steel; Impeller: Cast iron / stainless steel; Shaft: Stainless steel
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
ISO 9906 where applicable; IEC motor requirements; IP68 construction typical
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-SP is a TexasFlow series for water, wastewater, drainage applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 2 in to 16 in discharge |
|---|---|
| Pressure Rating | Duty-based casing pressure |
| Material | Casing: Cast iron / ductile iron / stainless steel; Impeller: Cast iron / stainless steel; Shaft: Stainless steel |
| Standard | ISO 9906 where applicable; IEC motor requirements; IP68 construction typical |
| Flow Rate | 10–2, 500 m³/h (44–11, 000 gpm) |
| Head | 5–120 m |
| Connection Type | Flanged / auto-coupling / hose |
| Temperature | 0 to 40 °C standard |
