Special-Application & Heavy-Duty Pumps (TF-HD). Proposed catalog envelope: 10–5,000 m³/h (44–22,000 gpm); 5–200 m. Final selection is project-specific.
| Model | TF-HD |
|---|---|
| Pump Type | Engineered heavy-duty centrifugal pump for abrasive/corrosive/difficult liquids |
| Nominal Size Range | 2 in to 24 in typical |
| Flow Range | 10–5,000 m³/h (44–22,000 gpm) |
| Head | 5–200 m |
| Pressure Rating | Project-specific |
| Temperature | -20 to 180 °C depending materials |
| Connection | Flanged; specialty/lined options |
Casing: High-chrome / rubber-lined / stainless / duplex / alloy; Impeller: High-chrome / lined / stainless / alloy; Shaft: High-strength alloy/stainless
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
ISO 9906 where applicable; ISO 5199 where applicable; Project-specific wear/material requirements
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-HD is a TexasFlow series for mining, slurry, industrial applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 2 in to 24 in typical |
|---|---|
| Pressure Rating | Project-specific |
| Material | Casing: High-chrome / rubber-lined / stainless / duplex / alloy; Impeller: High-chrome / lined / stainless / alloy; Shaft: High-strength alloy/stainless |
| Standard | ISO 9906 where applicable; ISO 5199 where applicable; Project-specific wear/material requirements |
| Flow Rate | 10–5, 000 m³/h (44–22, 000 gpm) |
| Head | 5–200 m |
| Connection Type | Flanged; specialty/lined options |
| Temperature | -20 to 180 °C depending materials |
