Vertical Multistage Pumps (TF-VM). Proposed catalog envelope: 1–250 m³/h (4–1,100 gpm); 20–400 m. Final selection is project-specific.
| Model | TF-VM |
|---|---|
| Pump Type | Vertical in-line multistage centrifugal pump |
| Nominal Size Range | 1 in to 6 in (DN25–DN150) |
| Flow Range | 1–250 m³/h (4–1,100 gpm) |
| Head | 20–400 m |
| Pressure Rating | PN16 / PN25 / PN40; higher by model |
| Temperature | -15 to 120 °C |
| Connection | Flanged / grooved / threaded by size |
Casing: Stainless steel / cast-iron base-head combinations; Impeller: Stainless steel; Shaft: Stainless steel
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
ISO 9906; EN 1092 options; IEC motor requirements
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-VM is a TexasFlow series for booster, water, hvac applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 1 in to 6 in (DN25–DN150) |
|---|---|
| Pressure Rating | PN16 / PN25 / PN40; higher by model |
| Material | Casing: Stainless steel / cast-iron base-head combinations; Impeller: Stainless steel; Shaft: Stainless steel |
| Standard | ISO 9906; EN 1092 options; IEC motor requirements |
| Flow Rate | 1–250 m³/h (4–1, 100 gpm) |
| Head | 20–400 m |
| Connection Type | Flanged / grooved / threaded by size |
| Temperature | -15 to 120 °C |
