Cryogenic Pumps (TF-CRYO). Proposed catalog envelope: 5–800 m³/h (22–3,520 gpm); 20–300 m. Final selection is project-specific.
| Model | TF-CRYO |
|---|---|
| Pump Type | Cryogenic centrifugal pump, vertical submerged/barrel/transfer configuration |
| Nominal Size Range | 1 in to 8 in typical discharge |
| Flow Range | 5–800 m³/h (22–3,520 gpm) |
| Head | 20–300 m |
| Pressure Rating | Project-specific cryogenic class |
| Temperature | Down to ~-196 °C depending liquid/design |
| Connection | Cryogenic flanged / welded connections |
Casing: Austenitic stainless / cryogenic-compatible alloys; Impeller: Stainless / aluminum alloy where applicable; Shaft: Cryogenic-grade stainless
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
Project-specific cryogenic requirements; ASME / EN pressure connections; Oxygen cleanliness only when engineered/certified
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-CRYO is a TexasFlow series for cryogenic, lng, industrial gas applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 1 in to 8 in typical discharge |
|---|---|
| Pressure Rating | Project-specific cryogenic class |
| Material | Casing: Austenitic stainless / cryogenic-compatible alloys; Impeller: Stainless / aluminum alloy where applicable; Shaft: Cryogenic-grade stainless |
| Standard | Project-specific cryogenic requirements; ASME / EN pressure connections; Oxygen cleanliness only when engineered/certified |
| Flow Rate | 5–800 m³/h (22–3, 520 gpm) |
| Head | 20–300 m |
| Connection Type | Cryogenic flanged / welded connections |
| Temperature | Down to ~-196 °C depending liquid/design |
