Horizontal Split Case Two- and Three-Stage Fire Pumps (TF-HSC-FP). Proposed catalog envelope: 250–5,000 gpm (57–1,136 m³/h); 80–300 m. Final selection is project-specific.
| Model | TF-HSC-FP |
|---|---|
| Pump Type | Horizontal split-case centrifugal fire pump, two- or three-stage |
| Nominal Size Range | 4 in to 16 in typical |
| Flow Range | 250–5,000 gpm (57–1,136 m³/h) |
| Head | 80–300 m |
| Pressure Rating | Up to ~25 bar depending model |
| Temperature | Ambient clean fire-water |
| Connection | Flanged ASME / EN |
Casing: Cast iron / ductile iron / carbon steel; Impeller: Bronze / stainless steel; Shaft: Stainless/alloy steel
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
NFPA 20 configuration available; UL/FM only when specifically offered for selected model/package; Factory performance testing
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-HSC-FP is a TexasFlow series for fire water, buildings, industrial applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 4 in to 16 in typical |
|---|---|
| Pressure Rating | Up to ~25 bar depending model |
| Material | Casing: Cast iron / ductile iron / carbon steel; Impeller: Bronze / stainless steel; Shaft: Stainless/alloy steel |
| Standard | NFPA 20 configuration available; UL/FM only when specifically offered for selected model/package; Factory performance testing |
| Flow Rate | 250–5, 000 gpm (57–1, 136 m³/h) |
| Head | 80–300 m |
| Connection Type | Flanged ASME / EN |
| Temperature | Ambient clean fire-water |
