Standardized Chemical Process Pumps (TF-CP). Proposed catalog envelope: 2–1,200 m³/h (9–5,280 gpm); 5–160 m. Final selection is project-specific.
| Model | TF-CP |
|---|---|
| Pump Type | Horizontal end-suction standardized chemical process centrifugal pump |
| Nominal Size Range | 1 in to 10 in (DN25–DN250) |
| Flow Range | 2–1,200 m³/h (9–5,280 gpm) |
| Head | 5–160 m |
| Pressure Rating | PN16 / PN25 / project-specific |
| Temperature | -20 to 180 °C |
| Connection | ISO / EN / ASME flanges |
Casing: Ductile iron / carbon steel / SS304 / SS316 / duplex; Impeller: Matching corrosion-resistant alloy; Shaft: Stainless / duplex / alloy
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
ISO 2858; ISO 5199; ISO 9906; EN 1092 / ASME B16.5
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-CP is a TexasFlow series for chemical, petrochemical, industrial applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 1 in to 10 in (DN25–DN250) |
|---|---|
| Pressure Rating | PN16 / PN25 / project-specific |
| Material | Casing: Ductile iron / carbon steel / SS304 / SS316 / duplex; Impeller: Matching corrosion-resistant alloy; Shaft: Stainless / duplex / alloy |
| Standard | ISO 2858; ISO 5199; ISO 9906; EN 1092 / ASME B16.5 |
| Flow Rate | 2–1, 200 m³/h (9–5, 280 gpm) |
| Head | 5–160 m |
| Connection Type | ISO / EN / ASME flanges |
| Temperature | -20 to 180 °C |
