High-Pressure Pumps (TF-HP). Proposed catalog envelope: 5–1,000 m³/h (22–4,400 gpm); 100–1,200 m. Final selection is project-specific.
| Model | TF-HP |
|---|---|
| Pump Type | Multi-stage centrifugal high-pressure pump, horizontal or vertical |
| Nominal Size Range | 2 in to 12 in typical |
| Flow Range | 5–1,000 m³/h (22–4,400 gpm) |
| Head | 100–1,200 m |
| Pressure Rating | Up to ~120 bar depending design |
| Temperature | -10 to 160 °C |
| Connection | Flanged ASME / EN high-pressure class |
Casing: Ductile iron / carbon steel / stainless / forged high-pressure parts; Impeller: Stainless / bronze / alloy; Shaft: High-strength stainless/alloy steel
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
ISO 9906; ISO 5199 where applicable; ASME / EN connections; Project pressure testing
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-HP is a TexasFlow series for high pressure, booster, industrial applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 2 in to 12 in typical |
|---|---|
| Pressure Rating | Up to ~120 bar depending design |
| Material | Casing: Ductile iron / carbon steel / stainless / forged high-pressure parts; Impeller: Stainless / bronze / alloy; Shaft: High-strength stainless/alloy steel |
| Standard | ISO 9906; ISO 5199 where applicable; ASME / EN connections; Project pressure testing |
| Flow Rate | 5–1, 000 m³/h (22–4, 400 gpm) |
| Head | 100–1, 200 m |
| Connection Type | Flanged ASME / EN high-pressure class |
| Temperature | -10 to 160 °C |
