Self-Priming Pumps (TF-SFP). Proposed catalog envelope: 10–1,200 m³/h (44–5,280 gpm); 5–100 m. Final selection is project-specific.
| Model | TF-SFP |
|---|---|
| Pump Type | Horizontal self-priming centrifugal pump |
| Nominal Size Range | 2 in to 12 in discharge |
| Flow Range | 10–1,200 m³/h (44–5,280 gpm) |
| Head | 5–100 m |
| Pressure Rating | PN10 / PN16 typical |
| Temperature | 0 to 80 °C |
| Connection | Flanged / hose options |
Casing: Cast iron / ductile iron / stainless steel; Impeller: Cast iron / ductile iron / stainless steel; Shaft: Stainless steel
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
ISO 9906 where applicable; Project-specific priming/run test
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-SFP is a TexasFlow series for dewatering, wastewater, industrial applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 2 in to 12 in discharge |
|---|---|
| Pressure Rating | PN10 / PN16 typical |
| Material | Casing: Cast iron / ductile iron / stainless steel; Impeller: Cast iron / ductile iron / stainless steel; Shaft: Stainless steel |
| Standard | ISO 9906 where applicable; Project-specific priming/run test |
| Flow Rate | 10–1, 200 m³/h (44–5, 280 gpm) |
| Head | 5–100 m |
| Connection Type | Flanged / hose options |
| Temperature | 0 to 80 °C |
