Sewage and Solids Handling Pumps (TF-SSH). Proposed catalog envelope: 20–5,000 m³/h (88–22,000 gpm); 5–120 m. Final selection is project-specific.
| Model | TF-SSH |
|---|---|
| Pump Type | Non-clog sewage and solids-handling centrifugal pump |
| Nominal Size Range | 2 in to 24 in discharge |
| Flow Range | 20–5,000 m³/h (88–22,000 gpm) |
| Head | 5–120 m |
| Pressure Rating | Duty-based; PN10/PN16 typical |
| Temperature | 0 to 40 °C standard |
| Connection | Flanged / auto-coupling |
Casing: Cast iron / ductile iron / stainless steel; Impeller: Channel / vortex / non-clog iron or stainless; Shaft: Stainless steel
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
ISO 9906 where applicable; IEC motor requirements; EN / ASME discharge flanges
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-SSH is a TexasFlow series for wastewater, municipal, sewage applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 2 in to 24 in discharge |
|---|---|
| Pressure Rating | Duty-based; PN10/PN16 typical |
| Material | Casing: Cast iron / ductile iron / stainless steel; Impeller: Channel / vortex / non-clog iron or stainless; Shaft: Stainless steel |
| Standard | ISO 9906 where applicable; IEC motor requirements; EN / ASME discharge flanges |
| Flow Rate | 20–5, 000 m³/h (88–22, 000 gpm) |
| Head | 5–120 m |
| Connection Type | Flanged / auto-coupling |
| Temperature | 0 to 40 °C standard |
