Borehole Submersible Pumps (TF-BSP). Proposed catalog envelope: 1–600 m³/h (4–2,640 gpm); 20–600 m. Final selection is project-specific.
| Model | TF-BSP |
|---|---|
| Pump Type | Deep-well borehole submersible multistage pump |
| Nominal Size Range | 2 in to 12 in outlet; 4 in to 14 in bore classes |
| Flow Range | 1–600 m³/h (4–2,640 gpm) |
| Head | 20–600 m |
| Pressure Rating | High-head multistage; duty-selected |
| Temperature | 0 to 40 °C |
| Connection | Threaded / flanged outlet |
Casing: Stainless steel / cast iron / bronze combinations; Impeller: Stainless / polymer / bronze; Shaft: Stainless steel
Final metallurgy, shaft material, wear components, elastomers and seal arrangement are selected to suit the pumped liquid, temperature, pressure and project specification.
IEC motor requirements; ISO 9906 where applicable; Potable-water materials subject to project
Compliance, listing or certification applies only when specifically included in the selected model and quotation.
Documents are published when available for the selected configuration.
TF-BSP is a TexasFlow series for groundwater, irrigation, water applications.
Selection note: Published ranges are proposed catalog envelopes. Final model, duty point, NPSHr, motor power, pressure class, metallurgy and certification must be confirmed against approved manufacturer data.
| Size | 2 in to 12 in outlet; 4 in to 14 in bore classes |
|---|---|
| Pressure Rating | High-head multistage; duty-selected |
| Material | Casing: Stainless steel / cast iron / bronze combinations; Impeller: Stainless / polymer / bronze; Shaft: Stainless steel |
| Standard | IEC motor requirements; ISO 9906 where applicable; Potable-water materials subject to project |
| Flow Rate | 1–600 m³/h (4–2, 640 gpm) |
| Head | 20–600 m |
| Connection Type | Threaded / flanged outlet |
| Temperature | 0 to 40 °C |
